Doser for liquids

Equipment for dosing of liquid components

The doser provides water supply at the desired temperature in the required volume. Hot and cold water flows are mixed in the ratio, set by the controller. At the outlet, the temperature and flow rate of the liquid are measured and the corresponding corrections of the flow components are made. Up to 100 programs can be stored in the mixer-doser memory. Adjustment of the water temperature at the outlet of the mixer-doser is carried out by a mixing valve with a servo drive. It is also possible to adjust the temperature manually by turning the handles of the taps at the entrance. Water, that does not correspond to the specified temperature, is drained through the auxiliary outlet. If there is a need to connect the device to a computer, it can be done through the RS-458 interface, by placing a special order with the manufacturer.