Blow molding machine 7500 PET bottles / hour

Home English For dairy plants PET bottles production Blow molding automat for PET bottles TB-40

Blow molding automat for PET bottles TB-40

Equipment for PET-bottles production 7500 bottles / hour

https://r-t-group.com/dairy/pet/tb40

PET BOTTLES PRODUCTION PARAMETERS

High-speed blow molding machine TB-40 is designed for large PET-bottles production with productivity of 7500 bottles per hour. Machine uses 4 – 6 press-forms for molding of PET bottles.

Volume of PET bottles:

0.2 – 2.0 liters (up to 5 by request);

Bottle’s neck diameter:

28 mm or 38 mm;

Productivity:

5000 – 7500 bottles per hour.

OUR PHONES

OUR PHONES

+7 (812) 987-34-78

OUR E-MAIL

OUR E-MAIL

office@r-t-group.com

SKYPE, VIBER, WHATSAPP

SKYPE, VIBER, WHATSAPP

RT Group equipment, +7 (952) 368-34-78

PET bottles blow molding machine TB-40

TB-40 blow molding machine is designed for high-speed PET bottles production. Model can be customized for bottles of 5 liters. TB-40 blow molding machine can work in continuous mode by 3 shifts 24 hours a day with stops for maintenance procedures. It can guarantee minimal level of waste and lower self-cost of the produced PET bottles. For machine operation and maintenance is needed 2 operators. Blow molding machine TB-40 for PET bottles can be integrated into existing beverages pouring equipment. Onboard an  automatic control unit and synchronization unit. TB-40 has productivity of 5000 – 7500 PET bottles per hour. Machine must be joined to air compressor station to supply 34 bar of air pressure with consumption about 14000 nL/min.

Features of the blow molding machine TB-40:

Parameter
Figure
  Preform feeding Drive with a lifting conveyor
  Preform orientation system separator and stepping star
  Preform transportation by the neck of bottle

  Number of holders

118

  Number of adjustable heating levels

6

  Controlling the movement of preforms

servo-motor

  Cooling system

built-in independent

  Number of gripper for transferring the preform

4 – 6

  Gripper control

by pneumatic elements

  Pre-blowing air pressure

7-10 bar

  Blowing air pressure

32-34 bar

  Control panel

touch-screen

  PLC controller

yes

Contact us now for details

Please send us your request via contact form and we will be happy to assist you.


RELATED EQUIPMENT