Horizontal packing machine

Horizontal packaging machine RT-UM-GSH-S11

High speed packaging equipment for piece products into flow-pack bags

https://r-t-group.com/type/horizontal/RT-UM-GSH-S11

HORIZONTAL PACKAGING MACHINE RT-UM-GSH-S11 WITH UPPER FILM REEL LOCATION

High speed packaging machine RT-UM-GSH-S11 with upper film reel location is designed for packing of various food and non-food products into a three-seams flow-pack bags. Productivity is more than 500 bags / min. Products to be packed: bakery and confectionery, food products with humidity less than 15%, semi-finished products of dough, vegetables and fruits, including frozen, meat semi-finished products, cottage cheese, briquettes of ice cream as well as non-food piece products: household goods, dishwashers sponges, soap, disposable tableware, books, magazines, and similar goods. Products can be packed individually, or in a row, or in stacks or combined.

Type of bags with product:

horizontal flow-pack bags.

Productivity:

up to 500 bags / minute (with 5 positions jaws).

Packaging material:

thermosealed film from reels.

https://r-t-group.com/type/horizontal/RT-UM-GSH
OUR PHONES

OUR PHONES

+7 (812) 987-34-78

OUR E-MAIL

OUR E-MAIL

office@r-t-group.com

SKYPE, VIBER, WHATSAPP

SKYPE, VIBER, WHATSAPP

RT Group equipment, +7 (952) 368-34-78

DESCRIPTION OF THE HORIZONTAL PACKAGING MACHINE RT-UM-GSH-Servo-2

This horizontal packaging machines with upper location of the film reel is installed at catering and food facilities, as well as other enterprises. It uses thermo sealed packaging film, for example, polypropylene film in rolls or multilayer films. Due to high productivity, it is used together with an automatic piece products stacker – it places pieces to the feeding conveyor in automatic mode under the operator’s control. At machine’s outlet you will get horizontal flow-pack bags. Product inside bags can be placed single or by group in row or in stack or combined (several stacks per row). In all horizontal packaging machine for flow-pack bags is installed control system of CMZ (Italy) – main supplier of components for equipment manufacturers in Italy.

Basic configuration:

upper location of the film reel;
5 servo drives and 2 asynchronous motors;
sensors for the presence of pushers;
infeed conveyor for the system of automatic feeding of the product to machine;
two film roll holders with manual roll centering, compensation brake and automatic film gluing;
module for the packaging film unwinding with a device for compensation of the sagging of the film (for film width 450 mm);
module for longitudinal pulling and sealing of the packaging film with additional pairs of rollers for pre-heating of the film and plates (“irons”) of pre-heating;
pneumatic open of sealing rollers at the moment of film stop (while waiting for the product to packaging machine);
module for reading the photo mark on the packaging film;
fixed group for bag’s forming;
operator’s panel;
mechanism of cross sealing and cutting off the bags (with a straight inclined cuts);
discharge belt conveyor with length of 0.6 m;
sensor of the film end;
possibility to work with a “cold gluing of the film” (with adhesive layer).

Parameter
Figure
  Kinematic productivity, packs / min. up to 500*
  Productivity by film sealing, meters / min. 40

  Nominal dimensions of the packaged product, mm:

  length

  width

  hight

30 –  250 or 20 – 140 or 20 – 100 or 20 – 70

15 – 200 or 15 – 140 or 15 – 100 or 15 – 70

1 – 70 or 1 – 40 or 1 – 35 or 1 – 25

  Max length of the bag, mm

270 or 180 or 135 or 108

  Max width of the film reel, mm

450 or 310 or 310 or 230

  Power supply:

  voltage, V

  current frequency, Hz

380

50

  Installed power, kWt (not more)

10 or 12 or 14 or 16

  Machine dimensions (LxWxH), mm (not more)

  3100 x 1150 x 1750
  Total weight, kg (not more) 800

 

* Productivity depends on the type of sealing jaws. It can be 2-position jaws, 3-position jaws, 4-position jaws or 5-position jaws.

Productivity with 2 position jaws is 200 bags / min;

Productivity with 3 position jaws is 300 bags / min;

Productivity with 4 position jaws is 400 bags / min;

Productivity with 5 position jaws is 500 bags / min.

Other figures in the above spreadsheet are related to the type of sealing jaws.

pneumatic blowing out of empty bags from the discharge conveyor;
thermo printers: thermal transfer printer or ink jet printer;
labeling applicator for sticking of labels on the bags;
runners of feeding conveyor;
cutting knife type “zigzag”;
mechanical device for the forming of side folds (gusset);
pneumatic device “cooling plates of the pulling table”;
film perforation device;
extended discharge conveyor 1 m length;
extra fixed forming device for bags (for another bag dimensions);
adjustable forming device for bags (for a wide range of bags);
automatic loader system to conveyor; – frame of the packaging machine is made of stainless steel.

Contact us now for details

Please send us your request via contact form and we will be happy to assist you.