Vertical packaging machine SBi-200-B

• lever scheme of horizontal welding jaws with one pneumatic cylinder allows to reduce consumption of the compressed air to increase the force of compression of the jaws. This scheme allows to weld more thick packaging film and to provide a smoother and silent operations;
• modular bag’s forming tube, which does not require extra adjustments while changeover;
• possibility of changing the technical characteristics (performance, accuracy) by replacing moving parts of the main units (for example, exchange of pneumatic cylinders to servo-drive);
• entire path of the packaging film is located on the motorized reel unwinding cart, which allows to minimize the time for centering of the film with respect to collar and reduce its consumption. Optionally it is possible to install an automatic system for the packaging film centering;
• advanced software features allow to install as an option extra equipment: briquette machine, clipper, gas analyzer and etc;
• upper plate of the packaging machine is made of duralumin sheet, which allows to install on the machine a volumetric doser and protects packaging film from dust;
• modular design of the packaging machine allows to be flexible to different types of the bags; – non-inertial node of the longitudinal stabilization of the packaging film on the basis of the regulated torsion allows you to pull down the packaging film of different composition and thickness without jerks, what improves the quality of the bags and stability of work of the machine;
• self-aligning pulling belts for the packaging film ensure an uniform pressing force to the packaging film, thus increasing the accuracy of the bag’s length and reduces wear off of the belts;
• gluing table with magnets for gluing of the edges of the packaging film (when roll of film is ended);
• removable touch screen control panel 7 inches is for easy maintenance if the packaging machine;
• reel shaft is located as low as possible, which is convenient when replacing heavy reels of the packaging film;
• ergonomic design allows to minimize the downtime during changeover operation;
• minimum quantity of wear parts;
• all parts in contact with the product are made of stainless steel.

Parameter	Figure
Kinematic productivity, packs / min.	up to 120
Real productivity with product (depends on product and dose), packs / min.	depending on the type of doser
Bag dimensions, mm:   • length (within one cycle)   • width	50-280 60-200
Film type – thermo sealed film:   • film thickness, mkm	20-100
Type of heating elements	constant heating
Dimensions of film reel, mm (not more):   • width   • outside diameter   • inner core diameter	440 400 76
Power supply:   • voltage, V   • current frequency, Hz	220 50
Installed power, kWt (not more)	2.5
Compressed air consumption, Nl/min. (not more)	600
Compressed air pressure, MPa	0.6
Machine dimensions (LxWxH), mm (not more)	2000 x 1200 x 1350
Total weight, kg (not more)	500

• flat bottom of the bag forming;
• unit for forming of briquettes;
• exchangeable forming tubes;
• external devices (thermal printers, label applicator);
• advertising tape on the bag applicator;
• inert gas injection system;
• euro-slot cutting unit;
• dust extraction system;
• a table for sealing of the packaging film edges while replacing the reel of film;
• fan blower for the horizontal seam of the bag;
• foamed clamps for blowing out of air from the bag;
• compensation of the bag’s length (if printer is installed);
• dust protection for mechanical parts;
• automatic film centering unit;
• device for folding of the bottom seam of the bag;
• pneumatic gun is included.

		…